Коды ошибок Konica Minolta Bizhub C224/284/364 (C1184 - C11E1)

Список включает ошибки моделей C224/284/364 и C224e/284e/364e 

 

  • Code: C1184

Description:

Paper discharge control motor’s malfunction

<When FS-534 is installed>

The paper delivery control sensor (PS28) is not blocked or unblocked even after the set period of time has elapsed while the paper receiving control motor (M12) is energized.

Remedy:

  1. Check the connector between M12-relay CN1-FRCB J14 for proper connection, and correct as necessary.
  2. Check the connector of M12 for proper drive coupling, and correct as necessary. 
  3. Check the connector between PS28-relay CN1-FRCB J14 for proper connection, and correct as necessary.
  4. PS28 I/O check, sensor check FSCB J14<B>-3 (ON) FS-534 2~3-C.
  5. M12 operation check FSCB J14<A>-9 to 12 FS-534 2-C to D.
  6. Replace M12.
  7. Replace FSCB.

 

  • Code: C1195

Description:

Paper discharge control motor’s malfunction

<When FS-534+SD-511 is installed>

The curl cover detection sensor (PS2) is not blocked or unblocked even after the set period of time has elapsed after the paper discharge control motor (M2) is turned ON.

Remedy:

  1. Check the connector between M2-relay CN3-relay CN2-SDDB J5 for proper connection, and correct as necessary.
  2. Check the connector of M2 for proper drive coupling, and correct as necessary.
  3. Check the connector between PS2-relay CN3-relay CN2-SDDB J5 for proper connection, and correct as necessary.
  4. PS2 I/O check, sensor check SDDB J5 3 (ON) SD-511 3-B 
  5. M2 operation check SDDB J5 4 to 7 SD-511 3-B.
  6. Replace M2.
  7. Replace SDDB. 8 Replace FSCB.

 

  • Code: C1196

Description:

Center fold roller motor’s malfunction

<When FS-534+SD-511 is installed>

The guide home sensor (PS7) is not blocked or unblocked even after the set period of time has elapsed after the center fold roller motor (M8) is turned ON.

Remedy:

  1. Check the connector between M8-SDDB J8 for proper connection, and correct as necessary. 
  2. Check the connector of M8 for proper drive coupling, and correct as necessary. 
  3. Check the connector between PS7-SDDB J9 for proper connection, and correct as necessary. 
  4. PS7 I/O check, sensor check SDDB J9-6 (ON) SD-511 4-G. 
  5. M8 operation check SDDB J10 6 to 9 SD-511 1 to 2-F to G. 
  6. Replace M8.
  7. Replace SDDB.
  8. Replace FSCB.

 

  • Code: C1197

Description:

Tri-folding guide motor’s malfunction

<When FS-534+SD-511 is installed>

The tri-folding gate home sensor (PS11) is not blocked or unblocked even after the set period of time has elapsed while the tri-folding guide motor (M6) is energized.

Remedy:

  1. Check the connector between M6-SDDB J9 for proper connection, and correct as necessary. 
  2. Check the connector of M6 for proper drive coupling, and correct as necessary.
  3. Check the connector between PS11-SDDB J8 for proper connection, and correct as necessary. 
  4. PS11 I/O check, sensor check SDDB J8-10 (ON) SD-511 3-G.
  5. M6 operation check SDDB J9 7 to 10 SD-511 4-F to G. 
  6. Replace M6. 
  7. Replace SDDB. 
  8. Replace FSCB.

 

  • Code: C11A1

Description:

Exit roller pressure/ retraction malfunction
<When FS-533 is installed> The pick up roller position sensor (PS105) is turned neither ON nor OFF even after the set period of time has elapsed after the exit roller lift up motor (M104) is turned ON.

Remedy:

  1.  Check the connector between M104-FSCB CN109 for proper connection and correct as necessary.
  2. Check the connector of M104 for proper drive coupling, and correct as necessary.
  3. Check the connector between PS105-FSCB CN110 for proper connection and correct as necessary.
  4. PS105 I/O check, sensor check FSCB CN110 FS-533 7-D to E.
  5. M104 operation check FSCB CN109 FS-533 9-D to E.
  6. Replace M104.
  7. FSCB CP104 conduction check. 
  8. Replace FSCB.

 

  • Code: C11A2

Description:

Accommodation roller pressure/ retraction malfunction

<When FS-534 is installed>

The receiving roller retraction sensor (PS11) is not blocked or unblocked even after the set period of time has elapsed after the receiving roller retraction motor (M4) is turned ON.

Remedy:

  1. Check the connector between M4-FSCB J4 for proper connection and correct as necessary.
  2. Check the connector of M4 for proper drive coupling, and correct as necessary.
  3. Check the connector between PS11-FSCB J4 for proper connection, and correct as necessary.
  4. PS11 I/O check, sensor check FSCB J4<B>-16 (ON) FS-534 13-C.
  5. M4 operation check FSCB J4<A>-1 to 4 FS-534 11-C to D.
  6. Replace M4. 7 Replace FSCB.

 

  • Code: C11E1

Description:

Paper exit switching drive malfunction

<When FS-534 is installed>

The exchange folded knife home position sensor (PS30) is not blocked or unblocked even after the set period of time has elapsed after the FNS entry transport motor (M2) is turned ON.

Remedy:

  1. Check the connector between M2-FSCB J9 for proper connection and correct as necessary. 
  2. Check the connector of M2 for proper drive coupling, and correct as necessary.
  3. Check the connector between PS30-FSCB J4 for proper connection, and correct as necessary.
  4. PS30 I/O check, sensor check FSCB J4<A>-15 (ON) FS-534 12-C.
  5. M2 operation check FSCB J9<A>-1 to 4 FS-534 10 to 11-B to C.
  6. Replace M2. 
  7. Replace FSCB.