Коды ошибок Konica Minolta Bizhub C203/253/353 (C0001 - C255C)
Code: C0001
Description:
LCT connection failed
Code: C0202
Description:
Tray 1 feeder up/down abnormality
• The paper feed tray 1 upper limit sensor is not blocked even after the lapse of a given period of time after the lifting motion has been started.
Remedy:
1 Check the M8 connector for proper connection and correct as necessary. 2 Check the connector of M8 for proper drive coupling and correct as necessary. 3 PS8 I/O check, sensor check. 4 M8 operation check. 5 Change M8. 6 Change PRCB.
Code: C0204
Description:
Tray 2 feeder up/down abnormality
• The paper feed tray 2 upper limit sensor is not blocked even after the lapse of a given period of time after the lifting motion has been started.
Remedy:
1 Check the M9 connector for proper connection and correct as necessary. 2 Check the connector of M9 for proper drive coupling and correct as necessary. 3 PS15 I/O check, sensor check. 4 M9 operation check. 5 Change M9. 6 Change PRCB.
Code: C0206
Description:
Tray 3 feeder up/down abnormality
Code: C0208
Description:
Tray 4 feeder up/down abnormality
Code: C0209
Description:
LCT elevator motor malfunction
Code: C0210
Description:
LCT ascent motion failure
Code: C0211
Description:
Manual feed up/down abnormality
• The manual lift-up position sensor is not unblocked even when the transport motor has turned for a given number of pulses after the sequence to move the paper lifting plate from the standby position to the feed position was started.
• The manual lift-up position sensor is not blocked even when the transport motor has turned for a given number of pulses after the sequence to move the paper lifting plate from the feed position to the standby position was started.
Remedy:
1 Check the M1 connector for proper connection and correct as necessary. 2 Check the connector of M1 for proper drive coupling and correct as necessary. 3 PS17 I/O check, sensor check. 4 SL1 operation check. 5 M1 operation check. 6 Change SL1. 7 Change M1. 8 Change PRCB.
Code: C0212
Description:
LCT ejection failure
Code: C0213
Description:
LCT shift gate malfunction
Code: C0214
Description:
LCT shifting failure
Code: C0215
Description:
LCT shift motor malfunction
Code: C0301
Description:
Suction fan motor’s failure to turn
• The fan lock signal remains HIGH for a predetermined continuous period of time while the motor remains stationary.
Remedy:
1 Check the FM8 connector for proper connection and correct as necessary. 2 Check the fan for possible overload and correct as necessary. 3 FM8 operation check. 4 Change FM8. 5 Change PRCB.
Code: C0351
Description:
Paper cooling fan motor’s failure to turn
• The fan lock signal remains HIGH for a predetermined continuous period of time while the motor remains stationary.
Remedy:
1 Check the FM7 connector for proper connection and correct as necessary. 2 Check the fan for possible overload and correct as necessary. 3 FM7 operation check. 4 Change FM7. 5 Change PRCB.
Code: C1004
Description:
FNS communication error
Code: C1182
Description:
Shift motor mechanism failure
Code: C1183
Description:
Finishing option elevator drive malfunction
Code: C1190
Description:
Finishing option aligning bar moving mechanism malfunction 1
Code: C1191
Description:
Finishing option aligning bar moving mechanism malfunction 2
Code: C11A0
Description:
Paper holding drive failure
Remedy:
Code: C11A1
Description:
Finishing option exit roller pressure/retraction failure
Code: C11A2
Description:
Saddle exit roller pressure/retraction failure
Code: C11A3
Description:
Shutter drive failure
Code: C11A4
Description:
Saddle exit motor failure
Code: C11A5
Description:
Saddle in & out guide motor failure
Code: C11A6
Description:
Saddle layable guide drive failure
Code: C11B0
Description:
Finishing option stapler unit CD drive failure
Code: C11B2
Description:
Finishing option stapling mechanism malfunction 1
Code: C11B5
Description:
Side staple 1 drive failure
Code: C11B6
Description:
Side staple 2 drive failure
Code: C11C0
Description:
Punch motor malfunction
Code: C11D0
Description:
Crease motor drive failure
Code: C11E0
Description:
Route switch malfunction
Code: C1301
Description:
Finishing option cooling fan motor failure
Code: C2151
Description:
Secondary transfer roller pressure welding alienation
• During a retraction operation of the 2nd image transfer roller, the 2nd image transfer welding alienation sensor cannot detect the 2nd image transfer roller at its retracted position within a predetermined period of time after the 2nd image transfer retraction motor starts rotating. • During a pressure operation of the 2nd image transfer roller, the 2nd image transfer welding alienation sensor cannot detect the 2nd image transfer roller at its pressed position within a predetermined period of time after the 2nd image transfer retraction motor starts rotating.
Remedy:
1 Check the M16 connector for proper connection and correct as necessary. 2 Check the connector of M16 for proper drive coupling and correct as necessary. 3 PS36 I/O check, sensor check. 4 Change the right door assy. 5 Change PRCB.
Code: C2152
Description:
Transfer belt pressure welding alienation
• During a retraction operation of the transfer belt, the transfer belt retraction sensor cannot detect the transfer belt at its retracted position within a predetermined period of time after the transfer belt retraction clutch is turned ON. • During a pressure operation of the transfer belt, the transfer belt retraction sensor cannot detect the transfer belt at its pressed position within a predetermined period of time after the transfer belt clutch is turned ON.
Remedy:
1 Check the M5 connector for proper connection and correct as necessary. 2 PS31 I/O check, sensor check. 3 CL7 operation check. 4 M5 operation check. 5 Change CL7. 6 Change M21. 7 Change PRCB.
Code: C2164
Description:
PC charge malfunction
• When electrostatic charge output is ON, electrostatic charge leak detection system continues to detect leaks for a predetermined period of time.
Remedy:
1 Check the imaging unit for proper connection and correct as necessary. 2 Check the HV connector for proper connection and correct as necessary. 3 Check the PRCB connector for proper connection and correct as necessary. 4 Change IU. 5 Change HV. 6 Change PRCB.
Code: C2253
Description:
Color PC motor’s failure to turn
• The motor lock signal remains HIGH for a predetermined continuous period of time while the motor is turning.
Remedy:
1 Check the M2 connector for proper connection and correct as necessary. 2 Check the M2 connector for proper drive coupling and correct as necessary. 3 Check the PRCB connector for proper connection and correct as necessary. 4 M2 operation check. 5 Change M2. 6 Change PRCB.
Code: C2254
Description:
Color PC motor’s turning at abnormal timing
• The motor lock signal remains LOW for a predetermined continuous period of time while the motor remains stationary.
Remedy:
1 Check the M2 connector for proper connection and correct as necessary. 2 Check the M2 connector for proper drive coupling and correct as necessary. 3 Check the PRCB connector for proper connection and correct as necessary. 4 M2 operation check. 5 Change M2. 6 Change PRCB
Code: C225D
Description:
Color dev. unit engagement/disengagement failure
• The gears remain disengaged after the lapse of a predetermined period of time after the engagement operation is started by the color dev. unit engaged motor. • The gears remain engaged after the lapse of a predetermined period of time after the disengagement operation is started by the color dev. unit engaged motor.
Remedy:
1 Check the M10 connector for proper connection and correct as necessary. 2 Check the M10 connector for proper drive coupling and correct as necessary. 3 Check the PRCB connector for proper connection and correct as necessary. 4 PS26 I/O check, sensor check. 5 M10 operation check. 6 Change M10. 7 Change PRCB.
Code: C2351
Description:
K toner suction fan motor’s failure to turn
• The motor lock signal remains HIGH for a predetermined continuous period of time while the motor is turning.
Remedy:
1 Check the FM3 connector for proper connection and correct as necessary. 2 Check the fan for possible overload and correct as necessary. 3 FM3 operation check. 4 Change FM3. 5 Change PRCB.
Code: C2451
Description:
Release new transfer belt unit
• A new installation is not detected when a new transfer cleaner unit (image transfer belt unit) is installed.
Remedy:
1 Reinstall unit. 2 Check there is a short circuit in the fuse of the transfer belt unit. 3 Check the PRCB connector for proper connection and correct as necessary. 4 Change PRCBCB
Code: C2551
Description:
Abnormally low toner density detected cyan TCR sensor
• TC ratio in the developing machine, which is determined by toner replenishing amount control mechanism, is 4 % or less for a given number of times consecutively.
Remedy:
1 Reinstall imaging unit. 2 Reinstall toner cartridge. 3 M3, M4 operation check (At this time, IU must be non-installation.). 4 Change imaging unit. 5 Change PRCB.
Code: C2552
Description:
Abnormally high toner density detected cyan TCR sensor
• TC ratio in the developing machine, which is determined by Toner replenishing amount control mechanism, is 11 % or more for a given number of times consecutively.
Remedy:
1 Reinstall imaging unit. 2 Reinstall toner cartridge. 3 Change imaging unit. 4 Change PRCB.
Code: C2553
Description:
Abnormally low toner density detected magenta TCR sensor
• TC ratio in the developing machine, which is determined by toner replenishing amount control mechanism, is 4 % or less for a given number of times consecutively.
Remedy:
1 Reinstall imaging unit. 2 Reinstall toner cartridge. 3 M3, M4 operation check (At this time, IU must be non-installation.). 4 Change imaging unit. 5 Change PRCB.
Code: C2554
Description:
Abnormally high toner density detected magenta TCR sensor
• TC ratio in the developing machine, which is determined by toner replenishing amount control mechanism, is 11 % or more for a given number of times consecutively. • When the connector of the TCR sensor is disconnected.
Remedy:
1 Reinstall imaging unit. 2 Reinstall toner cartridge. 3 M3, M4 operation check (At this time, IU must be non-installation.). 4 Change imaging unit. 5 Change PRCB
Code: C2555
Description:
Abnormally low toner density detected yellow TCR sensor
• TC ratio in the developing machine, which is determined by toner replenishing amount control mechanism, is 4 % or less for a given number of times consecutively. • When the connector of the TCR sensor is disconnected.
Remedy:
.1 Reinstall imaging unit. 2 Reinstall toner cartridge. 3 Change imaging unit. 4 Change PRCB.
Code: C2556
Description:
Abnormally high toner density detected yellow TCR sensor
• TC ratio in the developing machine, which is determined by toner replenishing amount control mechanism, is 11 % or more for a given number of times consecutively. • When the connector of the TCR sensor is disconnected.
Remedy:
1 Reinstall imaging unit. 2 Reinstall toner cartridge. 3 M3, M4 operation check (At this time, IU must be non-installation.). 4 Change imaging unit. 5 Change PRCB
Code: C2557
Description:
Abnormally low toner density detected black TCR sensor
• TC ratio in the developing machine, which is determined by toner replenishing amount control mechanism, is 4 % or less for a given number of times consecutively.
Remedy:
1 M3 operation check (At this time, IU must be non-installation.) 2 Reinstall imaging unit. 3 Reinstall toner cartridge. 4 Change imaging unit /K. 5 Change PRCB.
Code: C2558
Description:
Abnormally high toner density detected black TCR sensor
• TC ratio in the developing machine, which is determined by toner replenishing amount control mechanism, is 11 % or more for a given number of times consecutively. • When the connector of the TCR sensor is disconnected.
Remedy:
1 Reinstall imaging unit. 2 Reinstall toner cartridge. 3 Change imaging unit. 4 Change PRCB.
Code: C2559
Description:
Cyan TCR sensor adjustment failure
• TCR sensor automatic adjustment does not function properly, failing to adjust to an appropriate value.
Remedy:
1 Reinstall imaging unit. 2 Change imaging unit. 3 Change PRCB.
Code: C255A
Description:
Magenta TCR sensor adjustment failure
Remedy:
1 Reinstall imaging unit. 2 Change imaging unit. 3 Change PRCB.
Code: C255B
Description:
Yellow TCR sensor adjustment failure
Remedy:
1 Reinstall imaging unit. 2 Change imaging unit. 3 Change PRCB.
Code: C255C
Description:
Black TCR sensor adjustment failure
Remedy:
1 Reinstall imaging unit /K. 2 Change imaging unit /K. 3 Change PRCB.